Principle overview：
Ingredients: hydroxy organic compound and inorganic salt synthetic preparation
Physical and chemical properties:
Appearance: Light coffee powder, easily soluble in water, it is a special inhibitor for carbonate minerals (such as calcite, limestone, aragonite, etc.). It selectively adsorbs on the surface of these minerals and shields their charge to prevent collectors Combine with it to achieve the purpose of inhibition.
Environmental protection performance: non-toxic, non-corrosive, non-irritating odor, harmless to humans and animals, does not pollute water sources, and is easily biodegradable.
Flotation performance: It has good selectivity and inhibition, no inhibition to non-carbonate minerals, and flocculation of clay minerals (such as kaolin, refractory clay), so in addition to inhibiting carbonate minerals, it also has a desliming effect. It can help increase the recovery rate and can be used in any proportion with water.
Dosing point and dosage: adding a ball mill has better inhibition effect than adding a stirring tank, and can be added in an appropriate amount during selection. The amount of addition depends on the carbonate mineral content of 300-800g/t raw ore.
Precautions when using: Sodium carbonate has the effect of activating carbonate minerals. It is best not to use sodium carbonate when using this inhibitor. If it must be used, it should be inhibited and then activated. Use this inhibitor in front of sodium carbonate, and water The combination of glass can improve the suppression effect.
Preparation method: 5-10% (weight ratio) water soluble, cold water is enough. When dissolving, add water to the mixer first. After the mixer is started, slowly pour the medicine in to prevent agglomeration.
PH value of pulp: pH≤7.5, the specific conditions need to be determined by experiment.
Packing: 25KG/bag, plastic woven bag inside.
Transportation and storage: Store in a rain-proof, moisture-proof, and dry place.
